If you're experiencing bad WiFi, latency when playing games, or a weak signal in some rooms, it might be time to change Orbi channel. The wireless channel that your Orbi router uses determines how it communicates with other devices; crowded channels might cause interference. This comprehensive guide explains how to switch the Orbi channel using Orbilogin.com.

Why Change Orbi channel?

The 2.4GHz and 5GHz band channels are used by Orbi and other WiFi routers. If too many nearby routers are utilizing the same channel, your connection can deteriorate. Switching to a less crowded channel will improve speed and stability while reducing interference.

How to Change a Channel in Orbi?

Connect your Orbi Network.

• Make sure your laptop or smartphone is connected to your Orbi WiFi network.

Launch the Orbi Admin Panel.

• Enter Orbilogin.com in the browser's address bar.

• To log in, enter your admin credentials. If you haven't changed them, the default username is admin and the default password is password.

Go to Advanced Settings.

• Once inside, select Advanced > Advanced Setup > Wireless Settings.

Configure Wireless Channels manually 

• For 2.4GHz, use channels 1, 6, or 11; these are typically the best options to avoid overlap.

• 5GHz gives you more choices, and your router may provide channels between 36 and 165. The one with the least quantity of traffic should be chosen.

Implement the Configurations

• Once the channels have been selected, click Apply. Your Orbi system may restart and your devices may briefly disconnect and rejoin the network.

As an added precaution, use a WiFi analyzer.

• To choose the best channel, use a WiFi analyzer app, which is available in most app stores. It helps you figure out which local channels are the busiest.

Proper Orbi setup and channel selection may have a big influence on your home network's performance. Now that you know how to change the Orbi channel, you're headed for faster, more reliable WiFi.

To learn more about orbi setup, visit our homepage.